Calculated-industries 4065 v3.1 User Guide Instrukcja Użytkownika Pobierz pdf (Strona 81)

SER

’

UIDE

— 73

Notes on Changing Stored Stair Variables:

To Change Desired Riser Height: If you wish to use a Desired

Riser Height of other than 7-1/2 Inches (the calculator’s default),

simply enter a new value. For example, to enter 8 Inches, enter

8 i ß 7. Press ® 7 to review your new entry. This value

will be permanently stored until you change it.

To Change Desired Tread Width: If you wish to use a Desired

Tread Width of other than 10 Inches (the calculator’s default), simply

enter a new value. For example, to enter 10-1/2 Inches, enter

1 0 i 1 / 2 ß 9. Press ® 9 to review your new entry.

This value will be permanently stored until you change it.

To Change Desired Floor Thickness: If you wish to use a Desired

Floor Thickness of other than 10 Inches (the calculator’s default),

simply enter a new value. For example, to enter 12 Inches, enter

1 2 i ß 8. Press ® 8 to review your new entry. This

value will be permanently stored until you change it.

To Change Desired Headroom: If you wish to use a Desired

Headroom other than 6 Feet 8 Inches (the calculator’s default),

simply select a new value via the Preference Mode and use the +

or – keys to increase/decrease by one inch. See examples below.

This value will be permanently stored until you change it.

KEYSTROKE DISPLAY

1. Select Headroom via Preference Mode:

o o 0.

Ç ß ß ß ß HDRM 6 FEET 8 INCH

2. Decrease Headroom Height by 2 Inches:

– – HDRM 6 FEET 6 INCH

3. Then increase Headroom Height by 4 Inches:

+ + + + HDRM 6 FEET 10 INCH

4. Return Headroom Height to default of 6 Feet 8 Inches:

– – HDRM 6 FEET 8 INCH

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 109 110

Brak uwag

Calculated-industries 4065 v3.1 User Guide Instrukcja Użytkownika Strona 81